ALKY “HC” Series Cleaners – Alloy C276 for use on corrosive Alkylation Units
ALKY “HC” Series cleaners, made of Hastelloy C or C-276, allow clogged bleeder, vent and instrument tap valves to be cleaned safely and efficiently on Alkylation Units while containing process material. These tools eliminate the hazards of dangerous fires, spills and vapor releases while performing these tasks.
All Three designs of bleeder cleaners are shown below. Available to fit your female NPT process connections in 1/4″, 1/2″, 3/4″, 1″ MNPT’s
All models (Patent No. 8,584,296).
Type 1,0-14 pH,700 deg F / 370 C, PSI 600 / 40 BAR (graphite)
Type 2, 0-14 pH, 350 deg F / 175 C, PSI 600 / 40 BAR (TFE)
Type 3, 0-14 pH, 1000 deg F / 535 C, PSI 1000 / 70 BAR (Graphoil)
Straight Bleeder Cleaners
![straight[1]](http://www.cleanvalve.com/files/straight.jpg)
| MNPT | Description | Drill Dia. | Work Length | Model | ||||
| 1/4″ | Straight Tool | 1/4″ (6.5mm) | 24″/ 60cm | HC-4350-L-24″ | ||||
| 1/4″ | Straight Tool | 1/4″ (6.5mm) | 18″/ 45cm | HC-4350-L-18″ | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 24″/ 60cm | HC-5250-L-24″ | ||||
| 1/2″ | Straight Tool | 3/8″ (9mm) | 18″/ 45cm | HC-5250-L-18″ |
Angle 90 Bleeder Cleaners
| MNPT | Description | Drill Dia. | Work Length | Model | ||||
| 1/4″ | 90 Deg Angle Tool | 1/4″ (6.5mm) | 12″/30cm | HC-2500-L-12″ | ||||
| 1/4″ | 90 Deg Angle Tool | 1/4″ (6.5mm) | 7″/17cm | HC-2500-L-7″ | ||||
| 1/2″ | 90 Deg Angle Tool | 3/8″ (9.5mm) | 12″/30cm | HC-3400-L-12″ | ||||
| 1/2″ | 90 Deg Angle Tool | 3/8″ (9.5mm) | 7″/17cm | HC-3400-L-7″ |
Angle 60 Bleeder Cleaners
| MNPT | Description | Drill Dia. | Work Length | Model | ||||
| 1/4″ | 60 Deg Angle Tool | 1/4″ (6.5mm | 4″/60cm | HC-4300-L-24″ | ||||
| 1/4″ | 60 Deg Angle Tool | 1/4″ (6.5mm) | 18″/45cm | HC-4300-L-18″ | ||||
| 1/2″ | 60 Deg Angle Tool | 3/8″ (9.5mm) | 24″/60cm | HC-5200-L-24″ | ||||
| 1/2″ | 60 Deg Angle Tool | 3/8″ (9.5mm) | 18″/45cm | HC-5200-L-18″ |
Note. If you cannot locate the correct size or model of tool above click here.
specifications of components: pressure gauge, glycerine filled, constructed of 316 Stainless Steel, for restrictions refer to ASME B40.1. Fittings & connectors, constructed of 316 Stainless Stell conform to ANSI B36.10, ANSI B1.20.1, MIL-P-7105 B, barstock material ASME SA479. Manufactured to API 570, ASME B31.3. All components supplied conform to ANSI, ASME, ASTM and ISO-9002
