SULFUR “S” Series Cleaners

new_bleeder_cleanersSULFUR “S” Series cleaners are designed for use on sulfur units. They have a special valve that allows steam to be injected into the vent valve. This steam injection strips away sulfur as the tool is used. It also allows the tool to be cleaned of sulfur.  All models (Patent No. 8,584,296).

All Three designs of bleeder cleaners are shown below. Available to fit your female NPT process connections in 1/4″, 1/2″, 3/4″, 1″ MNPT’s

SULFUR BOSS™ is the only safe tool available to clean
clogged instrument taps, drain valves, manifolds and orifice taps on sulfur units. Available in diameters of from 1/8″ up to 5/8″ and in lengths from 7 inches to 72 inches with end connections from 1/4″ NPT to 1″ NPT. Never again use a dangerous contraption that has no pressure gauge or vent valve to rod out valves and taps. The standard rod out device is the type 1 unless otherwise selected below

Type 1,0-14 pH,700 deg F / 370 C, PSI 600 / 40 BAR (graphite)
Type 2, 0-14 pH, 350 deg F / 175 C, PSI 600 / 40 BAR (TFE)
Type 3, 0-14 pH, 1000 deg F / 535 C, PSI 1000 / 70 BAR (Graphoil)

Straight Bleeder Cleaners
Straight_BC_op_720x363
straight[1]

MNPT Description Drill Dia. Work Length Model
1/4″ Straight Tool 5/32″ (4mm) 12″ / 30cm SU-0750L-12″…Options & Parts Kits
1/4″ Straight Tool 5/32″ (4mm) 7″ / 17cm SU-0750L-7″
1/4″ Straight Tool 7/32″ (5mm) 12″ / 30cm SU-1650-L-12″…Options & Parts Kits
1/4″ Straight Tool 7/32″ (5mm) 7″ / 17cm SU-1650-L-7″
1/4″ Straight Tool 1/4″ (6mm) 12″ / 30cm SU-2550-L-12″…Options & Parts Kits
1/4″ Straight Too l1/4″ (6mm) 7″ / 17cm SU-2550-L-7″
1/4″ Straight Tool 1/4″ (6mm) 48″/120cm SU-4350-L-48″…Options & Parts Kits
1/4″ Straight Tool 1/4″ (6mm) 36″/ 90cm SU-4350-L-36″
1/4″ Straight Tool 1/4″ (6mm) 24″/ 60cm SU-4350-L-24″
1/4″ Straight Tool 1/4″ (6mm) 18″/ 45cm SU-4350-L-18″
1/2″ Straight Tool 3/8″ (9mm) 12″/ 30cm SU-3450-L-12″…Options & Parts Kits
1/2″ Straight Tool 3/8″ (9mm) 7″/ 17cm SU-3450-L-7″
1/2″ Straight Tool 3/8″ (9mm) 48″/120cm SU-5250-L-48″…Options & Parts Kits
1/2″ Straight Tool 3/8″ (9mm) 36″/ 90cm SU-5250-L-36″
1/2″ Straight Tool 3/8″ (9mm) 24″/ 60cm SU-5250-L-24″
1/2″ Straight Tool 3/8″ (9mm) 18″/ 45cm SU-5250-L-18″
3/4″ Straight Tool 1/2″ (13mm) 84″/210cm SU-6150-L-84″…Options & Parts Kits
3/4″ Straight Tool 1/2″ (13mm) 72″/180cm SU-6150-L-72″
3/4″ Straight Tool 1/2″ (13mm) 60″/150cm SU-6150-L-60″
3/4″ Straight Tool 1/2″ (13mm) 48″/120cm SU-6150-L-48″
3/4″ Straight Tool 1/2″ (13mm) 36″/ 90cm SU-6150-L-36″
3/4″ Straight Tool 1/2″ (13mm) 24″/ 60cm SU-6150-L-24″
3/4″ Straight Tool 1/2″ (13mm) 18″/ 45cm SU-6150-L-18″
3/4″ Straight Tool 1/2″ (13mm) 12″/ 30cm SU-6150-L-12″
1″ Straight Tool 5/8″ (15mm) 84″/210cm SU-7050-L-84″…Options & Parts Kits
1″ Straight Tool 5/8″ (15mm) 72″/180cm SU-7050-L-72″
1″ Straight Tool 5/8″ (15mm) 60″/150cm SU-7050-L-60″
1″ Straight Tool 5/8″ (15mm) 48″/120cm SU-7050-L-48″
1″ Straight Tool 5/8″ (15mm) 36″/ 90cm SU-7050-L-36″
1″ Straight Tool 5/8″ (15mm) 24″/ 60cm SU-7050-L-24″
1″ Straight Tool 5/8″ (15mm) 18″/ 45cm SU-7050-L-18″
1″ Straight Tool 5/8″ (15mm) 12″/ 30cm SU-7050-L-12″

Angle 90 Bleeder Cleaners
Angle_90_BC_op_720x483
angle_90

MNPT Description Drill Dia. Work Length Model
1/4″ 90 Deg Angle Tool 1/4″ (6.5mm) 24″/60cm SU-2500-L-24″ … Options
1/4″ 90 Deg Angle Tool 1/4″ (6.5mm) 18″/45cm SU-2500-L-18″
1/4″ 90 Deg Angle Tool 1/4″ (6.5mm) 12″/30cm SU-2500-L-12″
1/4″ 90 Deg Angle Tool 1/4″ (6.5mm) 7″/17cm SU-2500-L-7″
1/2″ 90 Deg Angle Tool 3/8″ (9.5mm) 24″/60cm SU-3400-L-24″ … Options
1/2″ 90 Deg Angle Tool 3/8″ (9.5mm) 18″/45cm SU-3400-L-18″
1/2″ 90 Deg Angle Tool 3/8″ (9.5mm) 12″/30cm SU-3400-L-12″
1/2″ 90 Deg Angle Tool 3/8″ (9.5mm) 7″/17cm SU-3400-L-7″

Angle 60 Bleeder Cleaners
Angle_60_BC
angle_60

MNPT Description Drill Dia. Work Length Model
1/4″ 60 Deg Angle Tool 1/4″ (6.5mm) 24″/60cm SU-4300-L-24″ …Options
1/4″ 60 Deg Angle Tool 1/4″ (6.5mm) 18″/45cm SU-4300-L-18″
1/2″ 60 Deg Angle Tool 3/8″ (9.5mm) 24″/60cm SU-5200-L-24″ …Options
1/2″ 60 Deg Angle Tool 3/8″ (9.5mm) 18″/45cm SU-5200-L-18″

FREE FLOW BOSS™ Brochure

Note. If you cannot locate the correct size or model of tool above click here.

specifications of components: pressure gauge, glycerine filled, constructed of 316 Stainless Steel, for restrictions refer to ASME B40.1. Fittings & connectors, constructed of 316 Stainless Stell conform to ANSI B36.10, ANSI B1.20.1, MIL-P-7105 B, barstock material ASME SA479. Manufactured to API 570, ASME B31.3. All components supplied conform to ANSI, ASME, ASTM and ISO-9002